Chevrolet Tahoe 2021-2023 3/4.5" Performance Handling Kit

Fits: Chevrolet Tahoe 2WD/4WD 2021, 2022

Chevrolet Suburban 2WD/4WD 2021, 2022

GMC Yukon 2WD/4WD 2021, 2022

GMC Yukon XL 2WD/4WD 2021, 2022

Cadillac Escalade 2WD/4WD 2021, 2022

Belltech Part# 1107HK

Replace your tired, stiff suspension and give it a commendable upgrade with Belltech's complete lowering coilover kit. Our valued kit lowers the front and rear end of your 2021 Tahoe/Yukon 4WD SUV and gives it superior ride quality. Your SUV will achieve outstanding handling with its new and improved lower center of gravity, taking turns, and making maneuvers quickly with reduced body roll and increased control. Our Belltech lowering coilovers feature phenomenal Street Performance dampers with perfected pre-set damping. They are proven to give you a smoother, safer, more even-feeling ride. The dampers are made of galvanized steel and zinc plated for a rust-preventing finish. They showcase a large 2.4" (60mm) damper body that holds increased volumes of oil, 35mm independent rebound and compression valves, and a low-friction design. All these details work together to provide you with damping that does not fade. Our 20mm hardened chrome piston rods give the design increased strength and durability. With threaded damper bodies and an easy-to-place spring perch, we are able to offer optimal height customization from -.5" to -3" in the front and -1" to -4.5" in the rear. After adjusting the ride height, it is important to accommodate the bump stop engagement, and we supply a progressive rate polymer, open-cell, bump stop, and packers to do just that. This coilover design uses a main spring and a helper spring. The helper spring keeps tension on the main spring when the suspension is at full droop, so it stays properly seated in place. Both springs are made of cold-formed, high tensile steel and powder-coated for longevity. To reduce noise and vibrations, we utilize a high durometer vulcanized rubber bushing. To keep the damper pristine and protect it from debris, we apply a plastic dust boot, and for easy installation, the OE top mount is used. Do not settle for lackluster suspension when you can have something so exceptional you will not want to leave the driver's seat.

• Height adjustable front -.5" to -3"
• Height adjustable rear -1" to -4.5"
• 2.4" (60mm) damper body
• 20mm hardened chrome piston rod
• 35mm independent rebound and compression valves
• Enhances ride quality
• Lowers center of gravity and reduces body-roll
• Perfected pre-set damping
• Progressive rate polymer, open-cell, bump stop
• Packers to perfect bump stop engagement
• High tensile steel springs, powder coated for longevity
• Easy installation
• Street Performance dampers
• Low-friction design
• High-quality materials
• High durometer vulcanized rubber bushing
• Plastic dust boot

NOTE: Does not fit Magneride or Adaptive Air Ride vehicles